1.75 in Rear Coil Spring Spacers — Ram 1500 2009–2026

KINGROCK KR-1302 1.75-Inch Rear Coil Spring Spacers — Ram 1500 2009–2026

Raise the rear of your Ram 1500 with KINGROCK KR-1302 coil spring spacers. This kit provides 1.75 inches of rear lift while retaining the factory coil springs.

The spacers feature welded construction with a centering collar and a black finish. The kit includes two spacers along with the mounting plates and hardware.

Features and Benefits

• 1.75 inches of rear lift to adjust rear suspension height.
• Retains the factory springs, with no need to replace the coil springs.
• Welded construction with a centering collar.
• Black finish that blends with the suspension components.
• Mounting plates and hardware included.
• Sold as a pair, with one spacer for each side of the vehicle.

Specifications

• Part number: KR-1302.
• Position: rear suspension.
• Lift height: 1.75 in.
• Suspension type: coil springs.

Applications

Ram 1500 2009–2026 equipped with rear coil springs, including Classic and DT models depending on the model year.

Not compatible with factory air suspension. Verify compatibility based on the vehicle’s model year, trim and suspension configuration.

Kit Contents

• 2 rear coil spring spacers.
• 2 mounting plates with welded nuts.
• 2 bolts.
• 2 washers.

Installation

Install the spacers using the supplied plates and hardware, ensuring proper positioning of the springs and their isolators. Check that all components are fully seated and follow the applicable torque specifications.

After lifting the vehicle, check shock length and travel, as well as suspension clearances at full compression and droop. Suitable shocks or compatible shock extensions may be required depending on the configuration.

KINGROCK Warranty

KINGROCK KR-1302 coil spring spacers are covered by a lifetime warranty in accordance with the KINGROCK warranty policy.